The Brilliant Advantage C3 Inset Gas Fire
The Brilliant Advantage C3 inset gas fire offers a bold design and a number of
options that allow you to customize the fire to your environment. The chrome
frame and fret support an open-fronted bed with a choice of realistic fuel
effects: coals, pebbles, charcoal or driftwood. The back of the fuel bed is
available in either plain black or a brick effect, and can be reversed at the
time of installation.
The Brilliant Advantage C3 inset gas fire is 616mm in height and 517mm in
width. It requires an inset height of 554mm, a width of 398mm, and a depth of
213mm. Suitable for Class 1 chimneys and Class 2 prefabricated flues, the C3
can be used with natural gas, or with LPG for an additional £54.99. The pebbles
fuel effect is not available for LPG.
The Brilliant Advantage C3 inset gas fire has a maximum heat output of 3.9kW
for natural gas, and a low of 2.4kW. It is equipped with the following safety
features: an oxygen depletion sensor (ODS), which shuts off the supply of gas
to the unit if the oxygen content of the combustion gases falls below a safe
level, and a flame supervision device (FSD), which automatically cuts off the
supply of gas to the unit if for any reason the flame goes out or becomes
unstable.
The Brilliant Advantage C3 comes with a manual control. For the ultimate in
convenience, a remote control is available for an additional cost
External Dimensions
Height: 616mm Width: 517mm Depth: 12mm
Inset Dimensions
Height: 554mm Width: 398mm Depth: 213mm
Output
Maximum heat output (NG): high 3.9Kw ; low 2.4Kw
Maximum heat input: high 7Kw ; low 4.1Kw (LPG)
Maximum heat output: high 3.2Kw ; low 2.4Kw
Maximum heat input: high 6.3Kw ; low 5.3Kw
Flue
Suitable for class 1 chimneys & class 2 prefabricated flues
